How to make your own metal soaking tube and bondage tub

You can make your very own metal tub, but if you can’t find any metal soaking tubes online you can still buy one from your local hardware store.

But what if you want to make one yourself?

I have created the DIY metal soaking bathtub and bondage tube tutorial to help you.

There are lots of DIY bathtub kits available online, but the metal soakingtub is my favourite.

It’s light, easy to make, and you can get it at most hardware stores.

You can also use it as a bed for a bed and bath.

I’ve written about metal soaking baths before, but this one is different.

You’ll need a small bucket, a screwdriver, a plastic tub and a metal tube.

A tub with a metal rod attached to the end is more versatile than a tub with just a metal base.

The metal rod will serve as the base and the metal tub will act as the head.

Use the metal rod to attach the metal base to the tub and screwdriver to tighten the base down.

Put the tub in a well-ventilated area where you won’t have to worry about humidity or mold.

When you’re ready to use the metal bathtub, use the screwdriver and a plastic tube to attach it to the base.

Fill the bathtub with warm water and then add the metal rods.

Allow the bath to soak for a few minutes to help remove any excess water.

Allow to cool completely and then use the tub as a bath.

You’re finished!

If you’ve never made a metal bath before, here’s a good idea of what you’ll need: 1 cup warm water 1 tub with metal rod attachment 1 metal tub base 2 metal tubs 1 plastic tub base 4 metal tub ends 1 screwdriver 3 nails 1 piece of string to tie the tub ends together